ANALYSIS OF QUALITY CONTROL COMPUTERIZED TOMOGRAPHY SCAN (CT SCAN) RESULTS IN INDONESIA BASED ON NATIONAL AND INTERNATIONAL STANDARDS

  • Yeni Pertiwi
  • Vonny Mei Sella
  • Johan Iskandar
Keywords: quality control CT scan, CT implementation rate, standard

Abstract

The purpose of this study is to assess the results of the implementation of Quality Control Computerized Tomography Scan (CT Scan) in Indonesia based on national and international standards. The method used is a literature study of quality control CT scan research results from 2012 to 2020 with various types of CT scans in Indonesia. The data obtained from the literature study carried out an in-depth analysis of compliance with national and international standards. The results of the analysis show that the standard implementation of QC CT Scan in Indonesia has a more complex parameter test than the ACR and IAEA standards. Based on the 2018 Bapeten Standard (RS3), the QC CT1 Implementation Rate is above 50%. Whereas in the ACR standard (RS1) there are 2 types of CT that are above 50% and in the IAEA standard (RS3) there are 7 CTs that are above 50%. The result of the parameter test based on RS3 standard, CT1 passed the test, CT2 there were 4 parameters that did not pass the test, namely PT2, PT5, PT14 and PT17. CT3 to CT 8 and CT 10 the QC results passed the test, while CT9 parameter PT9 did not pass the test. However, for CT2 to CT10, many QC parameters were not implemented. Based on the data analysis above, it can be concluded that the level of QC implementation based on national and international standards are very low.

References

ACR (2017). Computed Tomography Quality Control Manual. https://www.acraccreditation.org/modalities/ct
Bapeten .(2018). Peraturan Badan Pengawas Tenaga Nuklir (BAPETEN) Republik Nomor 2 Tahun 2018 Tentang Uji Kesesuaian Pesawat Sinar-X Radiologi Diagnostik dan Intervensional. https://jdih.bapeten.go.id/unggah/dokumen/peraturan/364-full(diubah).pdf.
Dick, J., Darras, K. E., Lexa, F. J., Denton, E., Ehara, S., Galloway, H., ... & Forster, B. B. (2021). An International Survey of Quality and Safety Programs in Radiology. Canadian Association of Radiologists Journal, 72(1), 135-141.
de Las Heras Gala, H., Torresin, A., Dasu, A., Rampado, O., Delis, H., Girón, I. H., ... & Zervides, C. (2017). Quality control in cone-beam computed tomography (CBCT) EFOMP-ESTRO-IAEA protocol (summary report). Physica Medica, 39, 67-72.
IAEA.(2012). Quality Assurance Programme for Computed Tomography: Diagnostic and Therapy Applications.https://www.iaea.org/publications/8751/quality-assurance-programme-for-computed-tomography-diagnostic-and-therapy-applications
Izewska, J., Coffey, M., Scalliet, P., Zubizarreta, E., Santos, T., Vouldis, I., & Dunscombe, P. (2018). Improving the quality of radiation oncology: 10 years’ experience of QUATRO audits in the IAEA Europe Region. Radiotherapy and Oncology, 126(2), 183-190.
Suryani, R. N. (2018). Kajian Uji Kesesuaian Pesawat CT Scan Type Optima CT520 di Rumah Sakit X.
Heru, P. (2013). Uji Kesesuaian Pesawat CT-Scan Merek Philips Briliance 6 dengan Peraturan Kepala BAPETEN Nomor 9 Tahun 2011. Jurnal Fisika Unand, 2(2), 120-127.
Khairunnisak, K., Milvita, D., & Sandy, K. Y. P. (2017). Uji Kesesuaian Pesawat CT–Scan 64 Slice Merek Philips di Instalasi Radiologi Rumah Sakit Universitas Andalas Padang Menggunakan Detektor Unfors Raysafe X2. Jurnal Fisika Unand, 6(4), 355-361.
Hasnani. (2017). Analisis Resolusi Kontras Citra CT Scan menggunakan Phantom American College Of Radiology (ACR).
Syamsidar, (2017). Analisis Akurasi dan Keseragaman CT Number dari Citra CT-Scan Mengunakan Phantom Gammex. http://digilib.unhas.ac.id/uploaded_files/temporary/DigitalCollection/NDA0ZTEwYWViYTRkOGY2MjRmODBjMjI2YmRjYmI4YWZjMmFkY2JjNA==.pdf
Sohrabi, M., Parsi, M., & Mianji, F. (2018). Determination of national diagnostic reference levels in computed tomography examinations of Iran by a new quality control-based dose survey method. Radiation protection dosimetry, 179(3), 206-215.
Parsi, M., Sohrabi, M., Mianji, F., & Paydar, R. (2018). Determination of examination-specific diagnostic reference level in computed tomography by a new quality control-based dose survey method. Health physics, 114(3), 273-281.
Putra, H. A. (2017). Aplikasi Program Quality Control Ct Scan Di Instalasi Radiologi Rumah Sakit Dr Soetomo Surabaya Aplikasi Program Quality Control Ct Scan Di Instalasi Radiologi Rumah Sakit Dr Soetomo Surabaya Aplikasi Program Quality Control Ct Scan Di Instalasi Radiologi Rumah Sakit Dr Soetomo Surabaya Aplikasi Program Quality Control Ct Scan Di Instalasi Radiologi Rumah Sakit Dr Soetomo Surabaya Aplikasi Program Quality Control Ct Scan Di Instalasi Radiologi Rumah Sakit Dr Soetomo Surabaya Aplikasi Program Quality Control Ct Scan Di Instalasi Radiologi Rumah Sakit Dr Soetomo Surabaya(207).:Prodi D Iv Teknik Radiologi. Http://Repository.Poltekkes-Smg.Ac.Id//Index.Php?P=Show_Detail&Id=14166
Ilyas, M. (2017). Monitoring Kendali Mutu (Quality Cotrol) pada Citra Ct Scan Berdasarkan StandardPengujian.http://repositori.usu.ac.id/bitstream/handle/123456789/3140/150821022.pdf?sequence=1&isAllowed
Published
19-04-2021